Correcting thoracic kyphosis is a stretch. The Thoracic Denneroll provides it
Lifting injuries, poor posture, and poor ergonomics can contribute to abnormal thoracic kyphosis, a condition that carries the risk of diminished nerve, ligament, and muscle function. Thoracic kyphosis can ultimately lead to health problems, back pain, and injury.
Along with traditional chiropractic care, the Thoracic Denneroll orthotic device provides the stretch needed to correct thoracic kyphosis. Designed by chiropractors, the Thoracic Denneroll’s shape is the result of Chiropractic BioPhysics’® evidence-based thoracic spine mode.
When viewed from the side, the thoracic spine should have a natural, oval- or egg-shaped curve, with slightly more curvature in the middle and upper region. The Thoracic Dennerol orthotic’s contoured, elliptical shape is designed to improve posture while relieving pain and muscle tension.
In some cases, the new Thoracic Support Block can enhance the effectiveness of the Thoracic Denneroll orthotic during treatment. When used in concert with the Thoracic Denneroll, it can help reduce posterior thoracic cage translation and reduce thoracic hyper-kyphosis.
The Thoracic Denneroll orthotic is recommended for use by apatients who present with:
- Hyper-kyphosis, with or without posterior thoracic translation relative to the pelvis;
- Increased lower, mid, or upper thoracic kyphosis;
- Anterior head posture greater than approximately 25mm;
- Rounded-protracted shoulder girdle and scapular region.
The Thoracic Denneroll
The DENNEROLL is a Thoracic orthotic device developed by Chiropractors. Its unique design provides a gentle but effective stretch that assists in the correction of abnormal Thoracic Kyphosis (Figures 6-8 below).
When properly used, the DENNEROLL can assist in relief of pain, muscle tension, and improved postural appearance. Enhanced patient comfort and improved health are the goals.
The Thoracic Support Block
When indicated in certain cases, the new Thoracic Support Block enhances the effectiveness of treatment. Its unique design helps reduce posterior thoracic cage translation in combination the thoracic Denneroll it will help reduce the thoracic hyper-kyphosis.
Denneroll Placement
There are three types of Thoracic Corrective setups appropriate for DENNEROLL application: Lower thoracic, Mid-Thoracic, and Upper-Thoracic. See Figures 9-11 below. Only a radiographic and postural analysis can determine which Denneroll Placement is right for the individual patient. The DENNEROLL device should only be used on a firm surface such as the floor, or a bench so that an effective stretch can be applied to the Thoracic tissues.
The main features of this Denneroll Thoracic Orthotic include:
• Contoured thoracic elliptical shape after the CBP evidence based Elliptical model.
• Denneroll peak placed at the top of the orthotic to create a 2-4 segment extension specificity.
• Comfortable and slightly compressible peak to allow for patient tolerance with a firm base for support.
• Note that changing the apex of the Thoracic spine contact with the peak of the Thoracic Denneroll allows customized fit to the individual patient’s needs and their spine.
• Extremely portable, effective, and user friendly.
The recommended types of patient cases and presentation for this orthotic system include (for more information –DOCTORS ONLY– please email us and ask for the user instruction guide):
• Hyper-kyphosis with or without posterior thoracic translation relative to the pelvis,
• Allows for specificity in correcting an increased lower, mid, or upper thoracic kyphosis,
• Anterior head posture greater than 25mm (approximately),
• Rounded-protracted shoulder girdle and scapular region. The size of the denneroll allows for support while simultaneously being narrow enough to allow the scapula to retract over the unit,
• The addition of different sizes of the support block under the Thoracic Denneroll allow correction of internal flexion-extension of the ribcage while simultaneously reducing kyphosis.
Figure 1. Thoracic Denneroll sitting centered on top of the Thoracic Support Block. The taper of the Denneroll and design was cut from the CBP evidence based Thoracic Kyphosis Elliptical model.
Figure 2. Thoracic Denneroll turned around so the peak contacts the lower thoracic spine (T10) while the tapered end supports the mid thoracic region. This setup is for hyper-kyphosis in the T9-T12 region with upper thoracic flexion relative to the lower.
Figure 3. Thoracic Denneroll placed in the mid thoracic spine (T6-T7). This setup is for mid-thoracic hyper-kyphosis with T1-anterior to T12—or upper thoracic flexion relative to the lowers.
Figure 4. Thoracic Denneroll sitting centered on top of the small 20mm block in the Thoracic Support Block System. This setup assist correction of mild posterior thoracic translation postures with upper thoracic kyphosis and anterior head translation.
Figure 5. Thoracic Denneroll sitting centered on top of the Thoracic Support Block. This setup assist correction of moderate-severe posterior thoracic translation postures with upper thoracic hyper-kyphosis and anterior head translation. This is for deformities where the T1 vertebra is posterior to T12.
WARNING: Certain conditions can contribute to increased risk of injury during cervical extension traction. If you experience any unusual symptoms including, but not limited to; increased pain, dizziness, headache, nausea, numbness, visual disturbances, muscle weakness, loss of coordination or function, please consult your spinal health professional before further use.
When lying on the Denneroll, it is best to keep your legs flat for the most effect on the thoracic spine.
Find a CBP Chiropractor
